A new form of cooling technology could be on the cards as we approach the end of the year

A new kind of cooling tech could be heading your way soon.

The concept of passive cooling has been around for a while now, and it’s one of the biggest reasons to invest in air-cooled tech.

But now a new generation of coolers could be coming to market.

Read MoreRead MoreAs it turns out, passive cooling isn’t the only cooling technology being developed.

The world of air-controlled cooling is rapidly growing, and companies are making a lot of headway.

Air-controlled coolers are often used to cool the devices inside laptops and other devices, and some of the newer technologies have been used in some of those devices.

But there’s one cooling technology that’s been getting a lot more attention: passive cooling.

The concept is to control the amount of air inside the device, using a device called a “cooling pump.”

The pump is designed to keep the temperature in the device at a desired level.

In theory, this would help keep your computer cool, even if it’s running a hot machine.

Cooling is a very different process than what you might think.

You’ll use a thermostat to make sure the ambient temperature is kept below a set temperature, and a pump is attached to the device to help keep the ambient temperatures to a specific set point.

This is how the cooling technology works.

But what happens if you’re not keeping your temperature at a certain set point?

Cooling tech has traditionally been used to keep your laptop cool by making it warm.

This happens when the device is placed in a room, and air is circulated around the device.

Cooling technology also works with other kinds of cooling devices.

It can be used to reduce ambient temperatures in some cases.

The key to passive cooling is in the cooling pump itself.

If you’re in the middle of a hot day, the air will circulate around your device.

If the temperature of the air stays above a certain level, you’ll notice a slight temperature difference.

This is where passive cooling comes into play.

A cooling pump is a little bit like a small radiator in that it can control the ambient air temperature.

If it keeps the temperature above a specific level, it’ll cool your device down.

The pump will then pump that ambient air through a series of tubes that make the device cool.

In this case, you could have a cool fan in the top of the cooling system that pushes air through the cooling tubes, and cool the device while the fan is on.

This way, you’re still getting cool air, but it won’t cool your machine to the point where it’s overheating.

But if you want to cool your computer while it’s not actively working, you need a cooling system.

This means having a cooling fan, or a fan controller, which can control how much air gets through the system.

Passive cooling systems have become quite popular in the last few years, as they provide a way to cool even the hottest of computers without running hot machinery or pushing it into a cold state.

The CoolingPump is the latest example of a cooling technology you could buy into.

The Cooling Pump has a water-cooling design that can be controlled by a thermo-resistance sensor.

The thermo resistance is a measure of how much of a change in temperature you can achieve.

A small amount of resistance means that the cooling is working properly.

The cooler the cooler the better, which is why passive cooling can work.

CoolTech has put a lot into the design, and the CoolTech CoolTech S40 will have a thermos-resistant water-block that’s designed to run on water.

This water-flow is controlled by an air-conditioning system.

The air-flow can also be adjusted based on the temperature inside the case.

In theory, the cooling might help cool the system by cooling the GPU and RAM, as well as the CPU.

But that’s not the case with the Cooltech CoolTech 10.

The cool air flow will allow for more air to enter the system, which means more heat is created in the process.

This can cause the cooler to run hotter, and this can also result in overheating issues.

You can also have problems with overclockers trying to make their machines run hotter than normal, so passive cooling could help cool them down.

Cooltech has also designed a thermal compound called POC, which will help cool down the cooler.

This cooling compound can be added to a cooling kit by simply drilling a hole in the cooler itself, and adding a piece of thermal compound.

POC also works well with a lot better cooling systems than the Cool Tech CoolTech 20, which has a lot bigger fans and a cooler that doesn’t have any cooling.

It’s unclear how many companies are actually building cooling systems like this.

CoolTech has had a lot success with its cooling products, and